Once you sign the delivery note, you've paid for every litre on it. A short delivery is one of the most expensive losses a station can have, because it happens in one go: 100 litres missing from a single tanker is more than most stations lose to evaporation in a month. A fixed routine at every delivery catches it while the driver is still on site.
Safety first: follow your site's unloading procedure and local regulations. Stop the engine, earth the tanker, keep fire extinguishers at hand and keep customers and vehicles away from the fill points.
Before the tanker unloads
- Check the paperwork. The delivery note should show the product and quantity for each compartment, and match your order.
- Check the seals. Every compartment seal should be intact, and the seal numbers should match the delivery note. A broken or mismatched seal is a reason to stop and call the supplier.
- Check the compartment levels where the tanker has calibrated marks. The fuel should reach the mark in each compartment.
- Dip your tank and record it, with the time and the meter readings of the nozzles on that tank. If you can, pause dispensing from that tank during the delivery.
- Make sure there's room. Check the tank can take the full quantity without overfilling.
- Confirm which product goes into which tank. Petrol in a diesel tank is far more expensive than a short delivery.
- Check density and temperature if your oil company supplies a hydrometer and thermometer. A sample that's off can mean the product has been tampered with.
During unloading
- Stay with the tanker for the whole delivery. Most short deliveries happen when nobody from the station is watching.
- Watch the hose connections for leaks and make sure each compartment goes into the right fill point.
- Check every compartment is empty at the end, and that the hose has drained into your tank and not back into the tanker.
After unloading: work out what you received
Wait for the fuel to settle before the second dip, typically 15 to 30 minutes, or as your supplier advises. Then:
If you paused dispensing, the last part is zero. For example:
| Item | Litres |
|---|---|
| Dip before delivery | 6,200 |
| Dip after delivery (settled) | 15,980 |
| Sold from that tank during delivery (from the meters) | 120 |
| Received: 15,980 − 6,200 + 120 | 9,900 |
| Invoiced | 10,000 |
| Short | 100 (1.0%) |
Small differences can be honest. Fuel delivered warm shrinks as it cools in your underground tank, roughly 0.1% for every 1°C for petrol. Our guide to temperature and evaporation loss explains how much is normal. Agree a tolerance with your supplier, and treat anything beyond it as short.
If the delivery is short
- Write the shortage on the delivery note before you sign, with both dips and the litres you received.
- Ask the driver to sign it too, and photograph the note, the seals and your dip readings.
- Tell the supplier the same day, in writing.
Never sign for the invoiced quantity "to check later". Once the note is signed without remarks, a claim is much harder to win.
Look for patterns
One short delivery might be a mistake. A run of small ones usually isn't. Keep a simple log of every delivery: date, supplier, tanker and driver, invoiced litres, received litres and the difference. After a few months, a particular driver or transporter that's always a little short stands out quickly.
Make delivery days visible in your numbers
If your stock loss is concentrated on delivery days, short deliveries are the likely cause. It's one of the seven common causes of fuel loss. In Fuelbotics, each purchase is recorded with its supplier and product alongside your dips, so the stock reconciliation shows the gain or loss between every dip, and you get an alert when a dip shows a loss larger than it should be.